Suspensión y dirección para Toyota Tundra

Suspension and Steering Parts for Toyota Tundra

Caring for your Toyota Tundra can be a big job. Sometimes you have parts that need to be replaced in your truck, and at other times you may just want to spruce it up and upgrade a little bit. Whether you decide you want to add a suspension kit on the rear or the suspension you have need repairs, you can find the parts and kits you need on eBay Motors.

When lifting or leveling, what parts need to be considered?

There are a few things to consider when adjusting the height of your Toyota Tundra, including the following parts:

  • Shocks: You may need to add longer shocks or extended-shock brackets for lifts of 2 inches or more. If the shocks arent changed, they can easily become worn-out.
  • Steering: If your lift job includes a vehicle with larger tires, keep in mind that there can be extra stress placed on the steering components. This may cause the vehicle to wander and feel off. To fix this, you can add stabilizers and adjust or replace the or Panhard bars.
  • Brakes: The brake system may need to be adjusted to accommodate larger tires. You can install high-performance or larger pads, rotors, or calipers.
  • Speedometer: If you add larger tires with your suspension or lift kit, it will make your speedometer inaccurate unless you adjust the speedometer. Thats because you will be traveling faster than the speedometer indicates on larger tires. This can be fixed electronically on newer vehicles and with gears for older vehicles.
  • Gearing: If using larger tires, the Tundras gearing can be off. This can cause lower RPMs and decreased low-end torque. New gearing can be put into the axles to compensate for this change.
  • Headlights: When adjusting the height of your Toyota Tundra, the angle of your headlights may need to be adjusted.
What is the purpose of lifting a trucks back end?

There are many reasons for lifting the back end of your Toyota Tundra. Some people just want it done because they like the way it looks. Another reason is that the vehicle is often used to travel on back roads and bumpy trails. A suspension kit can be used to lift the back end so that it doesnt scrape on high spots.

What is a leveling kit used for?

Trucks and SUVs are often used to carry heavy loads. Because of this, the rear end is often built higher than the front. This way, when the back is carrying a heavy load, it will still be high enough off the ground. It will also then be level with the front. Some people prefer to have their cars look level. As with raising the back-end suspension, a leveling kit is needed to raise the front so that it will not scrape on rough trails.

Categorías