Miras de rifle de caza U.S. Optics

Frequently Asked Questions About U.S. Optics Hunting Rifle Scopes

U.S. Optics has been crafting custom riflescopes and optics for the last 25 years, fulfilling the needs of military personnel, the police, and hunting enthusiasts. Their commercial off-the-shelf product line reflects the company's dedication to the production of the best optics available for the precision or competitive shooter. The new and used U.S. Optics hunting rifle scopes available on eBay are assembled and manufactured to collect, filter, and transmit light.

Do you need to lap the scope rings?

When you purchase one of the inexpensive hunting rifle scopes on eBay, there is no need to make an adjustment or lap the scope rings of your U.S. Optics piece. The rings used are designed and manufactured to work with the tube dimensions of their optics so the fit is correct.

How do you set the reticle focus?

To set the reticle focus, follow these six steps:

  • One: Set the magnification of the scope to the highest level.
  • Two: In a counter-clockwise motion, rotate the eyepiece until it stops.
  • Three: Aim the scope at the sky or a white wall. Both eyes should be open and the focus shouldn't be placed on a singular object.
  • Four: In a clockwise motion, rotate the eyepiece until the reticule is clearly focused.
  • Five: Once the reticle is focused, close your eyes for three seconds and reopen them. The reticle should still be sharp and clearly focused. If not, repeat the first four steps again until the desired result is reached.
  • Six: Reset the magnification to the lowest setting to confirm the image clarity of the reticle is as desired.
How do you mount the scope?

These high-quality hunting rifle scopes can be mounted in six steps.

  • Step 1: Per the rifle manufacturer's specifications, install the scope rings onto the scope base.
  • Step 2: Remove the scope ring tops and put the scope into the lower rings. Install the top rings and accompanying hardware, making sure the scope can rotate and slide fore and aft with ease within the rings.
  • Step 3: Position the scope to where there's eye relief, the entire field of view is clean, and the shooter's anticipated position is achieved.
  • Step 4: Level the rifle using a sand bag or a sled.
  • Step 5: Rotate the scope within the rings until the reticule is level. The process can be made faster using a leveling tool.
  • Step 6: Per the rifle manufacturer's specifications, secure the top scope ring screws.

Categorías